meta name="propeller" content="e08135c7d65fb1f2c7307ab8fb0c24e4" /> Step by Step to Install TWRP Recovery on OnePlus 3T. | Android Custom ROM & Official Firmware.

Tuesday, November 29, 2016

Step by Step to Install TWRP Recovery on OnePlus 3T.







As for OnePlus 3T TWRP Recovery, we wouldn’t be surprised even if it follows within a week of the phone’s public launch. OnePlus 3T is going to be a developer friendly device and hence it shouldn’t take long for it to get an unofficial build of TWRP recovery over at xda, followed by an official release at TeamWin’s website.

To install/flash TWRP recovery on your OnePlus 3T, you need to unlock bootloader first on the device. Thankfully, OnePlus device are as friendly as Nexuses to do this stuff. Let’s get started..

View my Flipboard Magazine.

 ÷ Prerequisites:

•Unlock bootloader OnePlus 3T First.see This Link

*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.


* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.


÷ Step by Step to Install TWRP Recovery on OnePlus 3T:


1- Download OnePlus 3T TWRP recovery .img file and save it to a separate folder on your PC.

2- Setup ADB and Fastboot on your PC, follow this link .

└ Skip if you’ve already have ADB setup on your PC.

3- Enable USB debugging on your OnePlus 3T:
Open Settings on your phone.

4- Go to About phone and tap seven times on Build number, this will enable Developer options.

5- Now go back to Settings and you’ll see Developer options there, open it.

6- Tick the USB Debugging checkbox.

7- Open the folder where you saved OnePlus 3T TWRP Recovery .img file in Step 1 above.

8- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.

9- Connect your OP3T to the PC. And type the following into the command window we opened in Step 5 above to boot your device into bootloader/fastboot mode:

adb reboot bootloader

└ If you get a permission dialogue on your OnePlus 3T to “Allow USB debugging”, tap OK.

10- Once your 3T boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:

fastboot flash recovery twrp.img

└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.

11- Once TWRP is successfully flashed on your OnePlus 3T, issue the following command to reboot:

fastboot reboot

That’s all. TWRP recovery should be installed on your device now. To boot into the freshly installed recovery, simply issue the adb reboot recovery command from PC command line when your device boots into system.



For More OnePlus 3T latest Updates Keep Checking Android Custom ROM Fix™

Let us know What You Guys Think of this New Post in the comments section and stay tuned for more latest Updates.

That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Latest Updates.

Best Regards.™

No comments:

Post a Comment