Wednesday, November 2, 2016

How to Install TWRP 3.0.2 Recovery on Samsung Galaxy J3 (2016).






TWRP Touch Recovery will allow you to install custom ROMs, advanced options like formatting the system partition, making backups etc. The entire tutorial has been given on the next page for those who want to install this custom recovery on their phones.



Add to Flipboard Magazine. November 2, 2016 by Android Custom ROM Fix™


View my Flipboard Magazine.


 ÷ Prerequisites:

•This TWRP 3.0.2 Recovery installation tutorial is only for Galaxy J3 (2016) . Please do not try on any other Galaxy variants.

•Make sure you backup all your data in your phone before proceeding as a precaution.

•This TWRP 3.0.2 Recovery tutorial works with Android 6.0.1 and all future Android updates.




*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.





* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Install TWRP 3.0.2 Recovery on Samsung Galaxy J3 (2016).

Step 1 – Download TWRP 3.0.2 Recovery package for Samsung Galaxy J3 (2016) and extract this file anywhere in your computer

Step 2 – Download ODIN v3.09 which will help you to install CWM Recovery on Samsung Galaxy J3 (2016) .

Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.

Step 4 – Make sure you have your Samsung Galaxy J3 (2016) USB drivers installed on your computer.

Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.








Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

Click on ‘PDA’ / ‘AP’ and select the CWM package file you downloaded in step 1 for your phone.
Step 8 – In ODIN, uncheck the Auto Reboot and  check F. Reset Time options, if not already.

Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

Step 10 – After the installation is completed, you should hold your Power Button, Volume Button and Home Button until the screen turns black.

Step 11 – Once it does, you need to let go of the Volume Down button and hold the Volume Up button while still pressing the other listed buttons. This will boot the phone into Recovery mode and you should now see TWRP 3.0 custom recovery interface.

Step 12 – You can now reboot your phone by touching the reboot option in TWRP.

That’s it! Your Samsung Galaxy J3 (2016) has now been flashed with TWRP 3.0.2. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.



For More Samsung Galaxy J3 latest Updates Keep Checking Android Custom ROM Fix!!

Let us know What You Guys Think of this New Post in the comments section and stay tuned for more latest Updates.

That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Latest Updates.

Best Regards.™

No comments:

Post a Comment