Android 7.0 Nougat XXU1ZPK4 firmware for Samsung Galaxy S7 is now available and you can install it with this guide. This firmware was leaked after users reported test builds in Korea based on Nougat.
Add to Flipboard Magazine. November 17, 2016 by Android Custom ROM Fix™
You Can Find Out How to Apply it Right Now Via This Easy Tutorial .
•This tutorial is only for Samsung Galaxy S7 G930F. Please don’t try this on any other variants of the phone.
•G930FXXU1ZPK4 is an official firmware by Samsung for the Galaxy S7 G930F.
•Make sure you backup all your data in your phone before proceeding.
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Update Galaxy S7 G930F to Official Android 7.0 Nougat XXU1ZPK4
Step 1 – Download Android 7.0 G930FXXU1ZPK4 for Galaxy S7 to your computer and extract the zip file.
»NOTE: The password for the ZIP file is as follows:
Step 2 – Download ODIN v3.09 which will help you to install Android 7.0 on Samsung Galaxy S7 G930F.
Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 – Make sure you have your Galaxy S7 USB drivers installed on your computer.
Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 – Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
•Click on ‘AP’ and select file with ‘AP’ in its name.
•Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
•Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
•Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
•Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
If you are using an older version of ODIN or flashing a firmware which doesn’t have the above mentioned file name format then look below for the abbreviations to the old name format. Do note that only file name changes, the functionality and back end process remains the same so don’t worry.
•AP = PDA
•BL = Boot Loader
•CP = Modem
Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 – After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.
That’s it. Your Samsung Galaxy S7 has now been updated to Android 7.0 build XXU1ZPK4 firmware update. Go to Settings > About phone to verify.
For More Samsung Galaxy S7 latest Updates Keep Checking Android Custom ROM Fix™
Let us know What You Guys Think of this New Post in the comments section and stay tuned for more latest Updates.
That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Latest Updates.