Redmi Note 12 Pro 5G is equipped with a MediaTek Dimensity 1080 processor, making this smartphone one of the best Redmi Note series devices. Users express their satisfaction with the performance and camera capabilities of this device. However, the operating system of a smartphone is also very important for users. Redmi Note 12 Pro 5G was launched with MIUI 14 based on Android 12, and now it will start receiving Android 13 update in EEA and India. * Firmware Detail: Region: China Branch: Stable Type: Fastboot OS: 13 Size: 6.7 GB URL: Download * MIUI 14 changelog: Highlights MIUI takes up less storage space now and keeps being swift and responsive over much more extended periods. Improved system architecture comprehensively boosts the performance of both pre-installed and third-party apps while saving power. Attention to detail redefines personalization and brings it to a new level. More than 30 scenes now support end-to-end privacy with no data stored in the cloud a...
Root access is worth all this, if you ask us. Not only could you customize your device a lot with root access, but you can add many features too. Plus the ability to take full backups of app, with their settings and data.
Let’s see how to root your. AT&T Galaxy S6.
View my Flipboard Magazine.
÷ Prerequisites:
•This only for AT&T Samsung Galaxy S6.
•Don’t try this on other S6 variant not on AT&T.
•Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components. Also, this trips KNOX, meaning KNOX would stop working on your device, and thus you won’t be able to Samsung Pay, or install enterprise Apps on your device at Office.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Root AT&T Samsung Galaxy S6 on Marshmallow 6.0.1 Update:
Step 1. Download Odin and Galaxy S6 Stock Auto Root kernel file .
Step 2. Install Galaxy S6 driver now. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.7.exe (other files could be hidden, hence not visible).
Step 4. Disconnect your Galaxy S6 from PC if it is connected.
Step 5. Enable OEM unlock on your device.
Go to Settings > About device. And then tap on build no. 7 times or until your get the message ‘You’re now a developer’.Go back to Settings, scroll down, and tap on ‘Developer options’.Look for ‘Enable OEM unlock’ and use its toggle to enable it. Accept the warning by tapping on OK button.
— Also make sure you have disabled theFind My Mobile option completely in Settings > Lockscreen and security settings.
Step 6. Boot Galaxy S6 into download mode:
Power off your Galaxy S6. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Power + Home + Volume down together until you see warning screen.Press Volume Up to continue to download mode.
Step 7. Double click on extracted file of Odin, Odin3 v3.10.7.exe, to open the Odinwindow, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 8. Connect your Galaxy S6 to PC now using USB cable. Odin should recognizeyour Galaxy S6. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
•You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
•If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
•You can try different USB ports on your PC too, btw.
Step 9. Load the stock auto root kernel file into Odin. For this, click the APbutton on Odin and the select the kernel file in .tar format.
Step 10. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy S6. Wait till installation is finished, after which your Galaxy S6 will reboot automatically. You’ll get PASS message as show below upon successful installation from Odin.
•If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
•If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
Step 12. Install the SuperSU app from the play store (if not present in the app drawer). Open it, and you will have root access.
That’s it. Enjoy the Root access on your AT&T Galaxy S6.
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Samsung Galaxy S6 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
÷ Prerequisites:
•This only for AT&T Samsung Galaxy S6.
•Don’t try this on other S6 variant not on AT&T.
•Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components. Also, this trips KNOX, meaning KNOX would stop working on your device, and thus you won’t be able to Samsung Pay, or install enterprise Apps on your device at Office.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Root AT&T Samsung Galaxy S6 on Marshmallow 6.0.1 Update:
Step 1. Download Odin and Galaxy S6 Stock Auto Root kernel file .
Step 2. Install Galaxy S6 driver now. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.7.exe (other files could be hidden, hence not visible).
Step 4. Disconnect your Galaxy S6 from PC if it is connected.
Step 5. Enable OEM unlock on your device.
Go to Settings > About device. And then tap on build no. 7 times or until your get the message ‘You’re now a developer’.Go back to Settings, scroll down, and tap on ‘Developer options’.Look for ‘Enable OEM unlock’ and use its toggle to enable it. Accept the warning by tapping on OK button.
— Also make sure you have disabled theFind My Mobile option completely in Settings > Lockscreen and security settings.
Step 6. Boot Galaxy S6 into download mode:
Power off your Galaxy S6. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Power + Home + Volume down together until you see warning screen.Press Volume Up to continue to download mode.
Step 7. Double click on extracted file of Odin, Odin3 v3.10.7.exe, to open the Odinwindow, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 8. Connect your Galaxy S6 to PC now using USB cable. Odin should recognizeyour Galaxy S6. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
•You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
•If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
•You can try different USB ports on your PC too, btw.
Step 9. Load the stock auto root kernel file into Odin. For this, click the APbutton on Odin and the select the kernel file in .tar format.
Step 10. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Step 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy S6. Wait till installation is finished, after which your Galaxy S6 will reboot automatically. You’ll get PASS message as show below upon successful installation from Odin.
•If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
•If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
Step 12. Install the SuperSU app from the play store (if not present in the app drawer). Open it, and you will have root access.
That’s it. Enjoy the Root access on your AT&T Galaxy S6.
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Samsung Galaxy S6 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
Comments
Post a Comment