Redmi Note 12 Pro 5G is equipped with a MediaTek Dimensity 1080 processor, making this smartphone one of the best Redmi Note series devices. Users express their satisfaction with the performance and camera capabilities of this device. However, the operating system of a smartphone is also very important for users. Redmi Note 12 Pro 5G was launched with MIUI 14 based on Android 12, and now it will start receiving Android 13 update in EEA and India. * Firmware Detail: Region: China Branch: Stable Type: Fastboot OS: 13 Size: 6.7 GB URL: Download * MIUI 14 changelog: Highlights MIUI takes up less storage space now and keeps being swift and responsive over much more extended periods. Improved system architecture comprehensively boosts the performance of both pre-installed and third-party apps while saving power. Attention to detail redefines personalization and brings it to a new level. More than 30 scenes now support end-to-end privacy with no data stored in the cloud a...
Galaxy A7 TWRP recovery is available as an Odin flashable .tar file, you can grab it from the download link below and simply flash it using Odin.
Note: The recovery is built and tested on A700F model of the device only. We can’t guarantee if it’ll work on other exynos based international variants of the device as well. If you’re installing this on other variants, make sure you know your way back should things go wrong.
View my Flipboard Magazine.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
÷ How To Install:
•Download Odin 3.10.7
• Download Galaxy A7 TWRP Recovery (.tar)
1- Unzip the Odin 3.10.6 .zip file and run/open Odin3 v3.10.6.exe file from the extracted files on your PC.
2- Make sure you’ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
3- (If applicable) Enable OEM unlock:
•Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
•Go back to main Settings page, scroll to bottom and select“Developer options” from there.
•Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
4- Boot your device into Download mode:Switch off your device.
5- Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.Press Volume Up on the warning screen to accept it and boot into Download mode.
6- Once your device is in download mode, connect it to the PC with a USB cable.
7- The Odin window on PC should detect the device and show an “Added!!” message.
8- Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
└ Note: DON’T play with any other options on the screen. You’re only required to connect your device and select the TWRP recovery .tar file in the PA tab.
9- Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
÷ How To Install:
•Download Odin 3.10.7
• Download Galaxy A7 TWRP Recovery (.tar)
1- Unzip the Odin 3.10.6 .zip file and run/open Odin3 v3.10.6.exe file from the extracted files on your PC.
2- Make sure you’ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
3- (If applicable) Enable OEM unlock:
•Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.
•Go back to main Settings page, scroll to bottom and select“Developer options” from there.
•Under Developer options, look for “Enable OEM unlock”checkbox/toggle and make sure you Check it or turn it ON.
4- Boot your device into Download mode:Switch off your device.
5- Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.Press Volume Up on the warning screen to accept it and boot into Download mode.
6- Once your device is in download mode, connect it to the PC with a USB cable.
7- The Odin window on PC should detect the device and show an “Added!!” message.
8- Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
└ Note: DON’T play with any other options on the screen. You’re only required to connect your device and select the TWRP recovery .tar file in the PA tab.
9- Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
Comments
Post a Comment