Add to Flipboard Magazine. October 19, 2016 by Android Custom ROM Fix™
With the availability of TWRP recovery, you can now also root LG Stylo 2 Plus easily via SuperSU or Magisk. Rooting gives you access to system level files on your device allowing you to modify settings that are otherwise restricted by your device manufacturer.
This Tutorial is only for LG Stylo 2 Plus K550.
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Install TWRP Recovery on LG Stylo 2 Plus K550:
1- Unlock bootloader on your device.
2- Download TWRP recovery .img file to your PC.
3- Setup ADB and Fastboot on your PC, follow this link .
4- Enable USB debugging on your device:
>> Open Settings on your device.
>> Go to About phone and tap seven times on Build number, this will enable Developer options.
>> Now go back to Settings and you’ll see “Developer options” there, open it.
>> Tick the USB Debugging checkbox.
5- Open the folder where your TWRP Recovery .img file is saved.
6- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
7- Connect your device to the PC. And type the following into the command window we opened in step 4 above to boot your device into bootloader/fastboot mode:
adb reboot bootloader
└ If your device asks for permission to “Allow USB debugging”, tap OK.
8- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:
fastboot flash recovery twrp.img
└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.
9- Once TWRP is successfully flashed on your device, issue the following command to reboot:
That’s all. We hope this guide serves you well.