Redmi Note 12 Pro 5G is equipped with a MediaTek Dimensity 1080 processor, making this smartphone one of the best Redmi Note series devices. Users express their satisfaction with the performance and camera capabilities of this device. However, the operating system of a smartphone is also very important for users. Redmi Note 12 Pro 5G was launched with MIUI 14 based on Android 12, and now it will start receiving Android 13 update in EEA and India. * Firmware Detail: Region: China Branch: Stable Type: Fastboot OS: 13 Size: 6.7 GB URL: Download * MIUI 14 changelog: Highlights MIUI takes up less storage space now and keeps being swift and responsive over much more extended periods. Improved system architecture comprehensively boosts the performance of both pre-installed and third-party apps while saving power. Attention to detail redefines personalization and brings it to a new level. More than 30 scenes now support end-to-end privacy with no data stored in the cloud and all actions
Motorola has been quick to update its Moto X 2nd Gen device to Android 5.1, but it’s not the latest Android version available as release. Android 5.1.1 is. While even newer Android M isn’t available for release yet. While Motorola updated the Droid Turbo to 5.1.1 — directly from Android 4.4, KitKat, yes! — there are no signs of Android 5.1.1 builds for Moto X 2nd Gen sets.
By installing this Android 5.1 build, your AT&T Moto X 2nd Gen will have build no. as LPE23.32-21.2. For more details of 5.1 About device screen, look at the info provided after the guide below.
Custom ROM fix © also have a full firmware installation guide available for Verizon Moto X 2nd Gen Android 5.1 update. In case you or your friend needs it!
÷ How to install AT&T Moto X2 (2nd Gen) to Android 5.1 firmware manually
Downloads
•5.1 update firmware | File: victara_att_51_lpe2332-212_cid1_cfcxml.zip (1.25 GB)
•RSDLite PC software | File: RSDLite6.2.4.zip (7.13 MB).
÷ Backup your Android. Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files
*Disclaimer:
Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
÷ Supported devices
AT&T MOTO X 2nd Gen (2014), model no. XT1097
Don’t try this one any other device!
1- Install the Moto X 2014 drivers.
2- Install the ADB drivers.
3- Download the RSDlite software and AT&T Moto X 2014 5.1 update file from the downloads section above.
4- Extract the firmware file using a free software like 7-zip, into a separate folder preferably.
5- From the extracted files, open the flashfile.xml file, and then remove the line(s) which have getvar command. Usually it’s as given below, but if there are more such lines, delete them too.
6- When done, save the file and close it.
<step operation = “getvar” var = “max-download-size” />
7- Remove the line(s) containing getvar text from another file, servicefile.xml. Save and close the file when done.
8- Reboot your AT&T Moto X 2014 to fastboot mode. Do this:
•Power off your device first.
Press and hold Power + Volume down together for 5-6 seconds, and then let go of buttons. You’ll enter bootloader mode, aka Fastboot mode. You’ll see
•FASTBOOT AP written at top.
•Extract the RSDLite6.2.4.zip file to get the RSDLite6.2.4.msi file.
•Install the RSDLite software by running the RSDLite6.2.4.msi file — double click on the file to start the installation.
9- Open the RSDLite software now.
10- Connect your device to PC now, with USB2.0 cable. Avoid USB3.0 cable when using RSDLite. You should receive Fastboot <device codename> text under the model coumn of RSDLite, in row one, as shown below.
11- On RSDLite, click on the 3-dot button and select the either servicefile.xml (btw, use flashfile.xml if you intend to completely wipe off the device).
→ Both files instruct RSDLite to flash the firmware files on the device, but servicefile doesn’t asks it to wipe the data of the devices. Thus if you use flashfile, your device’s apps, games, contacts, etc. will be deleted, while in case of servicefile, your data remains.
→ We recommend you to use servicefile, and in case device gets stuck at boot logo, then simply enter recovery mode (select it from fastboot mode) and then do a factory reset yourself, and then restart. Should be fine!
12- So, with device connected and showing up in RSDLite, and servicefile/flashfile selected, click the start button to begin flashing the 5.1 update on your Moto X 2014.
13- That’s it. When RSDLite is done flashing the 5.1 firmware, the device will restart automatically. Give it ample time to reboot, like 10-20 minutes.
→ Take care to not remove the cable until the device has restarted completely. Close the RSDLite only after that.
To confirm the 5.1 update’s installation, go to Settings > About device. You should see the info as given below.
System Version: 23.16.2.victara_att.att.en.US
Model number: Moto X
Android Version: 5.1
Baseband Version: MSM8974BP_4235210.110.09.11R
Build Number: LPE23.32-21.2
Build Date: Fri Jun 5 06:19:02 CDT 2015
Let us know via comments section below if you need any help with this. We will try our best to help you.
Comments
Post a Comment