How to Install TWRP on Huawei Honor 6X.

Add to Flipboard Magazine.  January 25,2017 by Android Custom ROM Fix

Huawei Honor 6X  just got its official ticket into the world of custom ROMs with TWRP now being officially available for the device. After unlocking your bootloader, flashing a custom recovery onto your device is the next step to bringing out the best your device is capable of.

If you’re not familiar with a custom recovery, this is basically the gateway to the world of root and custom modding of your device. The recovery of your smartphone is somewhat analogous to the BIOS on your PC. You can take complete ROM backups, flash unsigned zips files which may contain custom ROMs, MODs, Apps and other system modifications that are forbidden by the OEMs. Plus, TWRP also lets you flash the SuperSU zip to get root access.

*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.


* Important:

•Bootloader show be Unlocked

•Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

÷ How to Install TWRP on Huawei Honor 6X.

1-  Download Huawei Honor 6X (berlin) TWRP recovery

2- Get the TWRP recovery .img file from the download link above and save it to a separate folder on your PC.


3- Setup ADB and Fastboot on your PC, follow this link .

4- Enable USB debugging on your device:

1. Open Settings on your device.

2. Go to About phone and tap seven times on Build number, this will enable Developer           options.

  3. Now go back to Settings and you’ll see Developer options there, open it.

4. Tick the USB Debugging checkbox.

5- Open the folder where you saved TWRP Recovery .img file in Step 1 above.

6- Now open a command window inside that folder. To do that, “Shift + Right click”on any empty white space inside the folder and then select “Open command window here” from the context menu.

7- Connect your device to the PC. And type the following into the command window we opened in Step 5 above to boot your device into bootloader/fastboot mode:

adb reboot bootloader

└ If you get a permission dialogue on your device to “Allow USB debugging”, tap OK.

8- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:

fastboot flash recovery twrp.img

└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.

9- Once TWRP is successfully flashed on your device, issue the following command to reboot:
fastboot reboot.

That’s all. TWRP recovery should be installed on your device now. To boot into the freshly installed recovery, simply issue the adb reboot recovery command from PC command line when your device boots into system.


I've Written a lot of Posts Sharing latest Huawei Phones Updates.  You Can Find All Them Here:

View my Flipboard Magazine.

 Let us know What You Guys Think of this New Post in the comments section and stay tuned for more latest Updates.

That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Latest Updates.

Best Regards.™