Friday, April 29, 2016

How to Install TWRP on Meizu Pro 5 Running Flyme OS 5.1.3.

Meizu has updated their Meizu MX5 And PRO5 to latest Flyme OS 5.1.3.If you have updated your Meizu Pro 5 to Flyme OS 5.1.3 then you probably lost the root access on your device.But the good news is that now you can regain the root access by following few steps.

Don’t worry we are going to share step by step guide to safely Install TWRP on Meizu Pro 5 Running Flyme OS 5.1.3.

View my Flipboard Magazine.

÷ Prerequisites:

bootloader of Meizu Pro 5 must be unlocked.

•This is only for Meizu Pro 5, so don’t try this on other models.

•Make sure there is at least 60% battery left on your smartphone before begin.


Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.

÷ How to Install TWRP on Meizu Pro 5 Running Flyme OS 5.1.3 :

1- Download TWRP File twrp30.img for Meizu PRO 5.

2- Setup ADB and Fastboot on your PC.For  Guide Visit this link–>>Quickest Way To Install Android ADB and Fastboot (with drivers) on Windows

3- Enable USB debugging on your device:Open Settings on your device.Go to About phone and tap seven times on Build number, this will enableDeveloper options.

4- Now go back to Settings and you’ll see “Developer options” there, open it.Tick the USB Debugging checkbox.Open the folder where your TWRP Recovery .img file is saved.

5- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.

6- Connect your device to the PC. And type the following into the command window we opened in step 4 above toboot your device into bootloader/fastboot mode:
adb reboot bootloader

└ If your asks for permission to “Allow USB debugging”, tap OK.

7- Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file:fastboot flash recovery twrp-2.8.x.x-xxx.img

└ Here modify twrp.img with the name of your TWRP recovery .img file, OR change your TWRP recovery filename to twrp.img and use the command above.

8- Once TWRP is successfully flashed on your device, issue the following command to reboot:
fastboot reboot.

Done!!! Your device is now TWRP installed.

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

No comments:

Post a Comment