Redmi Note 12 Pro 5G is equipped with a MediaTek Dimensity 1080 processor, making this smartphone one of the best Redmi Note series devices. Users express their satisfaction with the performance and camera capabilities of this device. However, the operating system of a smartphone is also very important for users. Redmi Note 12 Pro 5G was launched with MIUI 14 based on Android 12, and now it will start receiving Android 13 update in EEA and India. * Firmware Detail: Region: China Branch: Stable Type: Fastboot OS: 13 Size: 6.7 GB URL: Download * MIUI 14 changelog: Highlights MIUI takes up less storage space now and keeps being swift and responsive over much more extended periods. Improved system architecture comprehensively boosts the performance of both pre-installed and third-party apps while saving power. Attention to detail redefines personalization and brings it to a new level. More than 30 scenes now support end-to-end privacy with no data stored in the cloud and all actions
Now you can easily root Galaxy Note 5 on Marshmallow method. This requires TWRP recovery, which is also provided below, along with a full guide to install both root and TWRP.
÷ Prerequisites:
•This only for Samsung Galaxy Note 5, model no.SM-N920C Don’t try on any other device whatsoever!
View my Flipboard Magazine.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Root Galaxy Note 5 SM-N920C On Marshmallow 6.0.1 Update:
Step 1. Download TWRP, root kernel, SuperSU and Odin 3.10.7 file .
→ Transfer the root kernel and SuperSU file to your Galaxy Note 5. Keep Odin and TWRP file on PC.
Step 2. Install Galaxy Note 5 driver (method 1 there!) first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not .
Step 4. Disconnect your Galaxy Note 5 from PC if it is connected.
Step 5. Boot Galaxy Note 5 into download mode:
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Power + Home + Volume down together until you see warning screen.Press Volume Up to continue to download mode.
Step 6. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 7. Connect your Galaxy Note 5 to PC now using USB cable. Odin should recognize your Galaxy Note 5. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
•You cannot proceed until Odin recognizes your device and you get the Added!! message.
•If it doesn’t, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem.
•You can try different USB ports on your PC too, btw.
Step 8. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the TWRP file in .TAR format.
Step 9. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Step 10. Click the Start button on Odin now to start flashing the TWRP on your Galaxy Note 5. Wait till installation is finished, after which your Galaxy Note 5 will reboot automatically. You’ll get PASS message as show below upon successful installation from Odin.
•If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the TWRP and flash it again as said above.
•If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
Step 11. With TWRP installed, it is now an easy job to root the device. Reboot into recovery mode to access TWRP recovery.
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Volume up + Home + Power together until you see Samsung logo on the screen.
→ Alternate method if you cannot power off your device. Do this if your Note 5 fails to boot properly after installing TWRP, which is not a problem.
Press and hold Volume down and Power button together to force restart the device, and right when screen goes off for restart, press and hold the Home + Volume up and Power button together to access TWRP recovery you had just installed. You would see TWRP written upon doing this correctly. If not done properly, device will try to reboot normally and you will see Samsung logo instead of TWRP.
Step 12. In TWRP, tap on Install button, and then select the kernel file. Then do the swipe action at bottom to install the kernel. Tap on Back button to go back to main screen of TWRP.
Step 13. Now, install the SuperSU file the same way you installed the kernel using the install button.
Step 14. Tap on Reboot System button to restart your Note 5, which will now have root access on Marshmallow build N920CXXU2BPB6. Your PB6 build is 100% rooted now.
→ That’s it. Enjoy the TWRP and root access on your Galaxy Note 5!
To access TWRP recovery, you have to reboot into recovery mode:
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Volume up + Home + Power together until you see Samsung logo on the screen.
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Samsung Galaxy Note 5 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
*Disclaimer:
Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
* Important:
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
÷ How to Root Galaxy Note 5 SM-N920C On Marshmallow 6.0.1 Update:
Step 1. Download TWRP, root kernel, SuperSU and Odin 3.10.7 file .
→ Transfer the root kernel and SuperSU file to your Galaxy Note 5. Keep Odin and TWRP file on PC.
Step 2. Install Galaxy Note 5 driver (method 1 there!) first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not .
Step 4. Disconnect your Galaxy Note 5 from PC if it is connected.
Step 5. Boot Galaxy Note 5 into download mode:
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Power + Home + Volume down together until you see warning screen.Press Volume Up to continue to download mode.
Step 6. Double click on extracted file of Odin, Odin3 v3.10.6.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 7. Connect your Galaxy Note 5 to PC now using USB cable. Odin should recognize your Galaxy Note 5. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
•You cannot proceed until Odin recognizes your device and you get the Added!! message.
•If it doesn’t, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem.
•You can try different USB ports on your PC too, btw.
Step 8. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the TWRP file in .TAR format.
Step 9. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Step 10. Click the Start button on Odin now to start flashing the TWRP on your Galaxy Note 5. Wait till installation is finished, after which your Galaxy Note 5 will reboot automatically. You’ll get PASS message as show below upon successful installation from Odin.
•If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the TWRP and flash it again as said above.
•If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
Step 11. With TWRP installed, it is now an easy job to root the device. Reboot into recovery mode to access TWRP recovery.
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Volume up + Home + Power together until you see Samsung logo on the screen.
→ Alternate method if you cannot power off your device. Do this if your Note 5 fails to boot properly after installing TWRP, which is not a problem.
Press and hold Volume down and Power button together to force restart the device, and right when screen goes off for restart, press and hold the Home + Volume up and Power button together to access TWRP recovery you had just installed. You would see TWRP written upon doing this correctly. If not done properly, device will try to reboot normally and you will see Samsung logo instead of TWRP.
Step 12. In TWRP, tap on Install button, and then select the kernel file. Then do the swipe action at bottom to install the kernel. Tap on Back button to go back to main screen of TWRP.
Step 13. Now, install the SuperSU file the same way you installed the kernel using the install button.
Step 14. Tap on Reboot System button to restart your Note 5, which will now have root access on Marshmallow build N920CXXU2BPB6. Your PB6 build is 100% rooted now.
→ That’s it. Enjoy the TWRP and root access on your Galaxy Note 5!
To access TWRP recovery, you have to reboot into recovery mode:
Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.Press and hold the three buttons Volume up + Home + Power together until you see Samsung logo on the screen.
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard 4 More Samsung Galaxy Note 5 latest updates.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Best Regards.
Comments
Post a Comment