Skip to main content

How to Install Latest TWRP 3.1.0 Recovery on Galaxy S7 Edge.



 How to Install Latest TWRP 3.1.0 Recovery on Samsung Galaxy S7 Edge.



Installing latest TWRP 3.1.0 Touch Recovery on Your Samsung Galaxy S7 Edge will allow you to install Custom ROMs, advanced options like formatting the system partition, making backups etc. The entire tutorial has been given below for those who want to install this custom recovery on their phones.



÷ Prerequisites:

•This TWRP 3.1.0 recovery installation tutorial is only for Galaxy S7 Edge. Please do not try on any other Galaxy S7 Edge variants.
•Make sure you backup all your data in your phone before proceeding as a precaution.
•This TWRP 3.1.0 Recovery tutorial works with Android 7.0 and all future Android updates.
Go to Settings > About device on your Galaxy S7 Edge and check your model no. It should be or do not proceed.



*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



 How To Install Latest TWRP 3.1.0 Recovery on Samsung Galaxy S7 Edge: 


👉Step 1 – Download TWRP 3.1.0 Recovery package for Samsung Galaxy S7 Edge and extract this fileanywhere in your computer:


NOTE: Make sure you select the appropriate fileabove for your Galaxy S7 Edge model.

👉Step 2 – Download Odin which will help you to install CWM Recovery on Samsung Galaxy S7 Edge .

👉Step 3 – Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into DownloadMode.

👉Step 4 – Make sure you have your Samsung Galaxy S7 Edge USB drivers installed on your computer.

👉Step 5 – Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.



👉Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.

👉Step 7 – Now select the following file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

Click on ‘PDA’ / ‘AP’ and select the CWM package file you downloaded in step 1 for your phone.

👉Step 8 – In ODIN, uncheck the Auto Reboot and  check F. Reset Time options, if not already.

👉Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.

👉Step 10 – After the installation is completed, you should hold your Power Button, Volume Button and Home Button until the screen turns black.

👉Step 11 – Once it does, you need to let go of the Volume Down button and hold the Volume Up button while still pressing the other listed buttons. This will boot the phone into Recovery mode and you should now see TWRP 3.1 custom recovery interface.

👉Step 12 – You can now reboot your phone by touching the reboot option in TWRP.




That’s it! Your Samsung Galaxy S7 Edge has now been flashed with TWRP 3.1.0. To enter Recovery Mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.

I've Written a lot of Posts Sharing latest Samsung Galaxy S7 Edge Updates..  Don't Hesitate You Can Find All Them Here 👇
View my Flipboard Magazine.

 Let us know What You Guys Think of this New Post in the comments section and stay tuned for more latest Updates.
That’s all. We hope this guide serves you well. If there’s anything you’d like to be added/changed on this page, PLZ Use the comment box below to contribute more ideas & Suggestions .
Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.
PLZ Follow Us On Flipboard Or join Us on Facebook page 4 More Latest Updates.
Best Regards.™



Comments

Popular posts from this blog

How to Update Huawei Honor Bee Y541-U02 to Stock Android 4.4 KitKat firmware (Build B107).

Stock Android 4.4 KitKat firmware (Build B107) of Huawei Honor Bee Y541-U02 is now available for download. This firmware, based on Emotion UI 3.0, is intended for the Indian market.



÷ Firmware Details

°Device: Huawei Honor Bee
°Model: Y541-U02
°Android: v4.4 KitKat
°EMUI: 3.0
°Firmware: B107
°Build: V100R001C583B107
°Region: India
°Date: 25.09.2015
°Code: 05021TSN
°Status: Official
°Type: Full firmware image
°File Name: Y541-U02_V100R001C583B107_Firmware_India_Channel-Others_05021TSN.zip


*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.



÷ How to Install :


Download Link: Official Mirror | Size: 664.38 MB

The installation procedure is pretty straightforward. Simply extract the Zip file and copy Update.app to yo…

HUAWEI G610-U20 Android Lollipop 5.1.1 Beta (root firmware) How To Install.

HUAWEI G610-U20 Android Lollipop 5.1.1 Beta (root firmware) is available now.

Follow our guide below to download the update and install it yourself.


View my Flipboard Magazine.


*Disclaimer:

Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.



÷ How To Install HUAWEI G610-U20 Android Lollipop 5.1.1 Beta (root firmware):

•Download the firmware here.

•Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.

•Step Two: Formatting SD card (optional).

• Step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.

•Step four: Check the root directory of the SD card you dload UPDATA.APP.

•Step 5: SD card into the phone is switched on in the main screen, pr…

How to Update Nexus 5X to Android 7.1.1 Nougat PixelMod ROM

Since This is a first release of a Pixel ROM for Nexus 5X, the feature list is pretty short at the moment, but the dev promises to bring more features to the ROM in coming days/weeks.


Add to Flipboard Magazine. October 26, 2016 by Android Custom ROM Fix™




Built by XDA developer argraur, the PixelMod ROM for Nexus 5X is based on the latest developer preview release NPF10C with Android 7.1.1. The ROM comes with the following features:

•Google Assistant
•Modified SystemUI with Pixel’s white navigation bar
•Pixel Launcher
•Pixel Launcher Icons
•Pixel Wallpaper Picker
•Pixel SetupWizard
•Pixel Bootanimation
•Removed Android Beta screen at boot
•Android 7.1.1 D
•CF-AutoRoot by Chainfire
•TWRP 3.0.2-2


View my Flipboard Magazine.


 ÷ Prerequisites:

•This tutorial is only for installing Android 7.1.1 Nougat PixelMod ROM on Nexus 5X.Please do not try on any other Nexus Variants.

•Your phone should be Rooted and have a Custom Recovery installed in order to install this CM14 ROM on your phone.

•We…