Sunday, January 31, 2016

How to Update Huawei Ascend Mate 2 (mt2) to Android 6.0 Marshmallow CM13 ROM.







Tremendous news today for Huawei Ascend Mate 2 (mt2) Owners Now they can Download Official CM13 Nightly Android 6.0.Marshmallow ROM ( stable) and install the ROM via custom Recovery Such as TWRP .


Follow our guide below to download the CM12.1 ROM and install it yourself.

The ROM is currently in nightly and that means there will be few bugs present but don’t worry you will receive updates every day which will fix those bugs.


View my Flipboard Magazine.


÷ Prerequisites:

•Fully unlocked bootloader

•This official CM 13 Nightly Android 6.0 Marshmallow  is only for Huawei Ascend Mate 2 (mt2) don't try it on other Huawei flagship .

• You Phone should be Rooted & have The latest version of a custom recovery (CWM or TWRP) installed on your phone.

•Make sure there is at least 80% battery left on your smartphone before begin this process.

•Warranty may be void of your device if you follow the procedures given on this page.






*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.


÷ How to Update Huawei Ascend Mate 2 (mt2) to Android 6.0 Marshmallow CM13 ROM :

Step 1: Download the CM 13 builds. Copy that ROM package to the root folder of your external SD card without extracting.

Step 2: You also need to download Google Apps.

Step 3: Disconnect the USB cable and reboot your phone in the recovery mode by holding Volume up + Power button.

Step 4: In the custom recovery, go to “Wipe” and perform a Factory Reset. You can manually wipe Cache, Data and System partitions too.

Step 5: Return to the main screen, tap “Install”and choose the ROM package your want to flash. Make sure Zip verification is not ticked otherwise the installation will fail.

Step 6: After installation, go to Install again and choose the Gapps zip package this time.

Step 7: Upon completion, tap “Wipe Dalvik Cache”to ensure you don’t encounter any bootloop.

Step 8: Finally, reboot your device from the Power menu. The first boot usually takes 5-10 minutes.



That’s it! Your Huawei Ascend Mate 2 (mt2) should now have Android 6.0.1 Marshmallow CM13 on your phone! Go to Settings > About phone to verify

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Huawei Ascend Mate 2 Latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

How to Update Galaxy S5 LTE G900F to Android 6.0.1 Marshmallow ResurrectionRemix Custom ROM .




Samsung Galaxy S5 G900F ResurrectionRemix custom ROM comes with tons of new features and is based on Android 6.0.1 Marshmallow. A quick list of the main features in ResurrectionRemix is given below and we are sure you’d love to use this on your Galaxy S5 G900F:



Dark Material Theme
Quick-Smart Pulldown
Buttons
Battery mods
Heads up
Lockscreen Shortcuts
ClockColor options
Statusbar clock customization + second + fonts
etwork traffic monitor
Toast animations
Add changelog
Listview animations
Navigation bar dimensions
Add Weather display to status bar header
Quick unlock
Overall Speed up system
Amazing Battery Life
Brand new music and audio fx app from cyanogen
Included all cm 13 features....

View my Flipboard Magazine.


 ÷ Prerequisites:

•This tutorial is only for installing ResurrectionRemix Android 6.0.1 ROM on Samsung Galaxy S5 G900F.

•Please do not try on any other Galaxy S5 variants.

•Your phone should be rooted and have ClockworkMod recovery installed from before.

•This tutorial will wipe out all your data. Proceed at your own risk.

•Perform a Dalvik Cache wipe before proceeding from the recovery mode.

•Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.

•Make sure you backup all your data in your phone before proceeding.





*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Update Galaxy S5 LTE G900F to Android 6.0.1 Marshmallow ResurrectionRemix Custom ROM :

Step 1 – Download ResurrectionRemix Android 6.0.1 ROM and Google Apps for Galaxy S5 to your computer.

Step 2 – Connect and mount your Galaxy S5 USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.

Step 6 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” . Use the Power button to select everything while in the Recovery Mode.

Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu .

Your Galaxy S5 G900F will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Galaxy S5 should now have ResurrectionRemix Android 6.0.1 Marshmallow custom ROM installed on your phone! Go to Settings > About phone to verify.



Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung Galaxy S5 latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.




SAMSUNG GALAXY Note 5 - SM-N920C XXU2APA2 Android 5.1.1 Lollipop ( Security Patch & Enhanced Features) Rolling Out Now [ How to Update]







Today Samsung Currently Pushing XXU2APA2 Update to the GALAXY Note 5 - SM-N920C on its network that includes a security update, as well as now displaying which security patch your phone has and bug fixes. It is recommended you keep your device updated to the latest software so that you don’t experience any flaws or drops in reliability.



N920CXXU2APA2 is based on the latest Android 5.1.1 Lollipop for the GALAXY Note 5 - SM-N920C.

Follow our guide below to download the update and install it yourself.

The Update brings the following changes:

•The security of your device has been improved.
•Device stability improvements, bug fixes.
•New and / or enhanced features.
•Further improvements to performance.

ModelSM-N920C
Model nameGALAXY Note 5
CountrySouth Africa (Vodafone)
VersionAndroid 5.1.1
Changelist6268364
Build dateTue, 19 Jan 2016 02:44:23 +0000
Product codeXFV
PDAN920CXXU2APA2
CSCN920COJV2APA1



Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.







÷ How To Update GALAXY Note 5 - SM-N920C to Android 5.1.1 Lollipop N920CXXU2APA2 Stock Firmware [Security Patches / Bug Fixes]


Download Samsung GALAXY Note 5 - SM-N920C  XXU2APA2 Firmware here.

1- Extract (unzip) the firmware file

2- Download Odin v3.10.7

3- Extract Odin ZIP file

4- Open Odin v.3.10.6

5- Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)

6- Connect phone and wait until you get a blue sign in Odin

7- Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked

8- Click the start button, sit back and wait few minutes.



That’s it! Your GALAXY Note 5 - SM-N920C should now have Android 5.1.1 Lollipop on your phone! Go to Settings > About phone to verify.

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung  GALAXY Note 5 Latest Updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

Saturday, January 30, 2016

How to Update Nexus 4 to Android 6.0.1 Marshmallow BeanStalk Custom ROM.







Nexus 4 BeanStalk custom ROM comes with tons of new features and is based on Android 6.0.1 Marshmallow. A quick list of the main features in BeanStalk is given below and we are sure you’d love to use this on your Nexus 4:


CyanogenMod 13 based
PIE
Built in Task Manager switcher
OnTheGo Mode
App Circle bar
System UI Tuner
Quicker system animations
Trimmed down fat and excess bloat
Option to enable all widgets
Numerous extra lockscreen options
LCD Density
Custom original BeanStalk Wallpapers by skyliner33v
Custom BeanStalk bootanimation by skyliner33v
3-minit battery support
Clock and date options
Contextual Header – Original and Polygraphic
Battery styles – Includes specific colors and styles. Also includes battery bar
Do not disturb option
Show notification count
Recent screen options
Customizable navigation bar
Use Omniswitch as default recents
Built-in screen record
Toast animations
App Circle bar
Gesture Anywhere
Disable FC warnings
Disable Immersive message
Force expanded Notifications
Configure scrolling cache
Build.prop MOD options to enable/disable tweaks as preferred
Less frequent Notification sounds options
CRT screen off/on options to specify how the animation shows
Enable/disable wake up on charge option
Superuser fully embedded into the build and accessed from settings menu
CM Performance options and features
Hide superuser icon
Developer options and advanced reboot enabled by default
Wakelock Blocker....

View my Flipboard Magazine.


 ÷ Prerequisites:

•This Android 6.0.1 BeanStalk ROM tutorial is only for Nexus 4 (occam) and I am not sure if it will work on the other variants of the Nexus 4 on other carriers.

•Make sure your phone is rooted and has a custom recovery like ClockworkMod installed.

•Make a Nandroid backup of your previous phone set up before proceeding – for just in case anything goes wrong.

•Install the Google Apps package if you want the usual Google apps (Gmail, Maps, Play Store, Calendar etc.) on your phone.








*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Update Nexus 4 to Android 6.0.1 Marshmallow BeanStalk  Custom ROM:

Step 1 – Download Android 6.0.1 BeanStalk ROM and Google Apps for Nexus 4 on your PC, if you haven’t already.

Step 2 – Connect and mount your Nexus 4 USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip and Google Apps zip files to your internal SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Bootloader Mode. Turn ON the phone while pressing and holding the Volume Up + Volume Down and Power buttons.

Step 6 – Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 7 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset. Use the Power button to select everything while in the Recovery Mode.

Step 8 – Then, perform a cache wipe by selecting “wipe cache partition”.

Step 9 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.


Step 10 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 11 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 12 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Nexus 4 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Nexus 4 should now have Android 6.0.1 BeanStalk Marshmallow custom ROM installed on your phone! Go to Settings > About phone to verify.



Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Nexus 4 latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

SAMSUNG GALAXY S6 Edge - SM-G925S official Android 6.0.1 Marshmallow Rolling out now [ How to Update]




Today  Samsung Currently Pushing G925SKSU3DPAC Android 6.0.1 Marshmallow Update to the GALAXY S6 Edge - SM-G925S on its network .


Follow our guide below to download the update and install it yourself.


ModelSM-G925S
Model nameGALAXY S6 Edge
CountryKorea (SK Telecom)
VersionAndroid 6.0.1
Changelist7037264
Build dateFri, 22 Jan 2016 13:48:52 +0000
Product codeSKC
PDAG925SKSU3DPAC
CSCG925SRKC3DPAC

View my Flipboard Magazine.


*Disclaimer:

Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.







÷ How To Update GALAXY S6 Edge - SM-G925S to Official Android 6.0.1 Marshmallow:


Download Samsung  GALAXY S6 Edge - SM-G925S G925SKSU3DPAC Firmware here.

1- Extract (unzip) the firmware file

2- Download Odin v3.10.7

3- Extract Odin ZIP file

4- Open Odin v.3.10.6

5- Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)

6- Connect phone and wait until you get a blue sign in Odin

7- Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked

8- Click the start button, sit back and wait few minutes.

That’s it! Your GALAXY S6 Edge - SM-G925S should now have Android 6.0.1 Marshmallow on your phone! Go to Settings > About phone to verify.


Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung GALAXY S6 Edge - SM-G925S Latest Updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.



How To Update GALAXY S6 - SM- G920L to Official Android 6.0.1 Marshmallow.







Today Samsung Currently Pushing  G920LKLU3DPAD Android 6.0.1 Marshmallow Update to the GALAXY S6 - SM-G920L on its network .



Follow our guide below to download the update and install it yourself.


View my Flipboard Magazine.

ModelSM-G920L
Model nameGALAXY S6
CountryKorea (LG Uplus)
VersionAndroid 6.0.1
Changelist61302269
Build dateMon, 25 Jan 2016 17:07:47 +0000
Product codeLUC
PDAG920LKLU3DPAD
CSCG920LLUC3DPAD


  *Disclaimer:

Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.







÷ How To Update GALAXY S6 - SM- G920L to Official Android 6.0.1 Marshmallow:


Download Samsung GALAXY S6 - SM- G920L G920LKLU3DPAD Firmware here.

1- Extract (unzip) the firmware file

2- Download Odin v3.10.7

3- Extract Odin ZIP file

4- Open Odin v.3.10.6

5- Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)

6- Connect phone and wait until you get a blue sign in Odin

7- Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked

8- Click the start button, sit back and wait few minutes.

That’s it! Your GALAXY S6 - SM-G920L should now have Android 6.0.1 Marshmallow on your phone! Go to Settings > About phone to verify.



Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung GALAXY S6 - SM- G920L Latest Updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

How to Update Galaxy S6 Edge G925F to Android 6.0.1 Marshmallow aTerminator Custom ROM.






Samsung Galaxy S6 Edge G925F  aTerminator custom ROM comes with tons of new features and is based on Android 6.0.1 Marshmallow. A quick list of the main features in aTerminator is given below and we are sure you’d love to use this on your Samsung Galaxy S6 Edge G925F:


De-bloated, CSC tweaks
Updated Apps
KNOX fully removed
Native Call Recording
Camera shutter sound button in the Samsung Camera app
Call/Message blocking Settings entry
Enable Call Button in call log list...

View my Flipboard Magazine.

 ÷ Prerequisites:

•This tutorial is only for installing Android 6.0.1 aTerminator ROM on Samsung Galaxy S6 Edge G925F.

•Please do not try on any other Galaxy S6 Edge variants.

•Your phone should have a custom recovery installed in order to install this aTerminator ROM on your phone.

•We will be using TWRP Recovery for this tutorial.

•This tutorial will wipe out all your data.

•Make sure you backup all your data in your phone before proceeding.

•Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.

•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.







*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Update Galaxy S6 Edge G925F to  Android 6.0.1 Marshmallow aTerminator  Custom ROM:


Step 1 – Download Android 6.0.1 aTerminator ROM for Galaxy S6 Edge to your computer.

Step 2 – Connect and mount your Galaxy S6 Edge USB memory to your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip file to your phone memory / SD card. Make sure the file is in the phone memory / SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.


Step 6 – Once you are in TWRP Recovery, perform a full data wipe by tapping on the ‘Wipe’ button. Then swipe on the “Swipe to Factory Reset” option at the bottom.

Step 7 – Now go back to the main menu and then tap on the ‘Install’ button. From the list, choose the ZIP file that you copied to your phone memory in Step 3.

Step 8 – Confirm installation on the next screen by swiping on the “Swipe to Confirm Flash” option. The installation procedure should start now .

Step 9 – Once the installation is completed.

Step 10 – Tap on the “Wipe cache/dalvik” button if you get into any boot loops or other issues.
Step 11 – You can now reboot your phone by selecting the “Reboot System” button.

Your Samsung Galaxy S6 Edge will boot now and it might take about 5 minutes to boot on your first time after flashing a new ROM. So, please wait.

That’s it! Your Samsung Galaxy S6 Edge should now have Android 6.0.1 aTerminator Marshmallow custom ROM installed on your phone! Go to Settings > About phone to verify.



Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung Galaxy S6 Edge latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

SAMSUNG GALAXY S6 - SM-G920K Official Android 6.0.1 Marshmallow Rolling Out Now [ How to Update]







Today Samsung Currently Pushing  G920KKKU3DPAD Android 6.0.1 Marshmallow   Update to the GALAXY S6 - SM-G920K on its network .



Follow our guide below to download the update and install it yourself.


ModelSM-G920K
Model nameGALAXY S6
CountryKorea (KT Corporation)
VersionAndroid 6.0.1
Changelist61302269
Build dateMon, 25 Jan 2016 17:06:45 +0000
Product codeKTC
PDAG920KKKU3DPAD
CSCG920KKTC3DPAD


View my Flipboard Magazine.

*Disclaimer:

Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.







÷ How To Update GALAXY S6 - SM-G920K to Official Android 6.0.1 Marshmallow:


Download Samsung GALAXY S6 - SM-G920K G920KKKU3DPAD  Firmware here.

1- Extract (unzip) the firmware file

2- Download Odin v3.10.7

3- Extract Odin ZIP file

4- Open Odin v.3.10.6

5- Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)

6- Connect phone and wait until you get a blue sign in Odin

7- Add the firmware file to AP / PDA.

8-Make sure re-partition is NOT ticked

9- Click the start button, sit back and wait few minutes.

That’s it! Your GALAXY S6 - SM-G920K should now have Android 6.0.1 Marshmallow on your phone! Go to Settings > About phone to verify.


Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung GALAXY S6 - SM-G920K Latest Updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

Friday, January 29, 2016

How to Install Android 6.0.1 Marshmallow Bliss Custom ROM on Nexus 5






Nexus 5 Bliss custom ROM comes with tons of new features and is based on Android 6.0.1 Marshmallow. A quick list of the main features in Bliss is given below and we are sure you’d love to use this on your Nexus 5:



Android 6.0.1 Marshmallow.
Lots of Customisation Features.
Fast & Smooth.
Stable.

View my Flipboard Magazine.

 ÷ Prerequisites:

 •This Android 6.0.1 Bliss ROM tutorial is only for Nexus 5 (hammerhead) and I am not sure if it will work on the other variants of the Nexus 5 on other carriers.

•Make sure your phone is rooted and has a custom recovery like ClockworkMod installed.

•Make a Nandroid backup of your previous phone set up before proceeding – for just in case anything goes wrong.

•Install the Google Apps package if you want the usual Google apps (Gmail, Maps, Play Store, Calendar etc.) on your phone.







*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.




÷ How to Install Android 6.0.1 Marshmallow Bliss Custom ROM on Nexus 5 :

Step 1 – Download Android 6.0.1 Bliss ROM and Google Apps for Nexus 5 on your PC, if you haven’t already.

Step 2 – Connect and mount your Nexus 5 USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip and Google Apps zip files to your internal SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Bootloader Mode. Turn ON the phone while pressing and holding the Volume Up + Volume Down and Power buttons.

Step 6 – Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 7 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.

Step 8 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 9 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 10 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 11 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 12 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu .

Your Nexus 5 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.



That’s it! Your Nexus 5 should now have Android 6.0.1 Bliss Marshmallow custom ROM installed on your phone! Go to Settings > About phone to verify.

Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Nexus 5 latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

How to Update HTC One (M9) to Android 6.0 Marshmallow Revolution HD Custom ROM.




HTC One M9 Android Revolution HD custom ROM comes with tons of new features and is based on Android 6.0 Marshmallow. A quick list of the main features in Android Revolution HD is given below and we are sure you’d love to use this on your HTC One M9:


Removed software (CPU) rendering – full Snapdragon 810 (GPU) rendering
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
System signatures check enabled for system security and safety
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
Fully de-odexed
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
sysro/sysrw commands support
Excellent battery life!
Improved EXT4 performance
OpenVPN support
Most up-to-date system files permissions
Adobe Flash Player support
Support almost 24h a day...

View my Flipboard Magazine.

 ÷ Prerequisites:

•This tutorial is only for installing Android 6.0 Android Revolution HD ROM on HTC One M9.

•Please do not try on any other One M9 variants.

•Your phone should have a custom recovery installed in order to install this Android Revolution HD ROM on your phone.

•We will be using TWRP Recovery for this tutorial.

•Bootloader should be unlocked.

•This tutorial will wipe out all your data.

•Make sure you backup all your data in your phone before proceeding.

•Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.






*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Update HTC One (M9) to Android 6.0 Marshmallow Revolution HD Custom ROM:


Step 1 – Download Android 6.0 Android Revolution HD ROM for One M9 to your computer and extract boot.img from the zip file separately.

Step 2 – Connect and mount your One M9 USB memory to your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0 ROM zip file to your phone memory / SD card. Make sure the file is in the phone memory / SD card root (not in any folder).

Step 4 – Copy/paste the boot.img file to android-sdk-windows\platform-tools directory.

Step 5 – Then turn OFF your phone and disconnect from the USB cable.

Step 6 – Now to get in the Bootloader/Fastboot Mode. Turn ON the phone while pressing and holding the Volume Down + Power buttons.

Step 7 – Once in the Fastboot mode (on your phone), navigate to android-sdk-windows\platform-tools directory (on your computer) and open Command Prompt (Shift + Right-click > Open Command Prompt).

Step 8 – Type the following command and press Enter.

fastboot flash boot boot.img
Step 9 – Then, type the following command and press Enter.

fastboot reboot

Step 10 – Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 11 – Once you are in TWRP Recovery, perform a full data wipe by tapping on the ‘Wipe’ button. Then swipe on the “Swipe to Factory Reset” option at the bottom.

Step 12 – Now go back to the main menu and then tap on the ‘Install’ button. From the list, choose the ZIP file that you copied to your phone memory in Step 3.

Step 13 – Confirm installation on the next screen by swiping on the “Swipe to Confirm Flash” option. The installation procedure should start now .

Step 14 – Once the installation is completed.

Step 15 – Tap on the “Wipe cache/dalvik” button if you get into any boot loops or other issues.
Step 16 – You can now reboot your phone by selecting the “Reboot System” button.

Your HTC One M9 will boot now and it might take about 5 minutes to boot on your first time after flashing a new ROM. So, please wait.

That’s it! Your HTC One M9 should now have Android 6.0 Android Revolution HD Marshmallow custom ROM installed on your phone! Go to Settings > About phone to verify.



Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More HTC one M9 latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.



How to Install Android 6.0.1 Marshmallow crDroid Custom ROM on Galaxy S4 LTE I9505 .






Samsung Galaxy S4 LTE I9505  crDroid custom ROM comes with tons of new features and is based on Android 6.0.1 Marshmallow. A quick list of the main features in crDroid is given below and we are sure you’d love to use this on your Galaxy S4 LTE I9505:


Volume panel timeout
Slim recents panel
Clear recents location
Lock app on recents panel
SlimRoms Heads up (with snooze time, timeout, touch to hide and swipe behavior)
SlimRoms custom lockscreen shortcuts
SlimDim
Ticker notifications
Navbar on/off
Hardare keys on/off (in devices supported)
Power menu in navring targets
SlimPie controls with all working
Sound panel option om power menu
Superuser indicator (Notification, Statusbar icon or no indicator)
Force expanded notifications on expanded statusbar
Power menu and notifications tiles
Four tiles per row
Vibrate on tiles touch
Disable quick settings on secure lockscreen
CAF task manager
Kill app back button configurable timeout
Ambient display with a bunch of options
ADBlocker
System apps remover
IME advanced settings
SELinux switch
Network traffic meter
RAM bar in recents panel
Wakelock blocker
Battery saver enhancements
Non intrusive incoming call
Option to disable battery saver orange bars
Swipe behavior
Touch outside behavior...

View my Flipboard Magazine.

 ÷ Prerequisites:

•This tutorial is only for installing Android 6.0.1 crDroid ROM on Samsung Galaxy S4 LTE I9505.

•Please do not try on any other Galaxy S4 variants.


•Your phone should be rooted and have ClockworkMod recovery installed from before.

•This tutorial will wipe out all your data. Proceed at your own risk.

•Perform a Dalvik Cache wipe before proceeding from the recovery mode.

•Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.

•Make sure you backup all your data in your phone before proceeding.






*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Install Android 6.0.1 Marshmallow crDroid Custom ROM on Galaxy S4 LTE I9505 :

Step 1 – Download Android 6.0.1 crDroid ROM and Google Apps for Galaxy S4 to your computer.

Step 2 – Connect and mount your Galaxy S4 USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloaded Android 6.0.1 ROM zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.

Step 6 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” as. Use the Power button to select everything while in the Recovery Mode.

Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu .

Your Galaxy S4 LTE I9505 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Galaxy S4 should now have Android 6.0.1 crDroid Marshmallow custom ROM installed on your phone! Go to Settings > About phone to verify.



Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Samsung Galaxy S4 latest updates

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

Thursday, January 28, 2016

How to Install Rooted Android 6.0.1 Marshmallow Beta 2 on your Galaxy S6 Edge G925F .






Great news today for Samsung Galaxy S6 Edge G925F as XDA Senior Member eltoffer has posted a guide on how to download and install the latest Android 6.0.1 Marshmallow release (Beta 2, rooted) for the Samsung Galaxy S6 Edge G925F.



*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.


* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.


More info & Instructions via XDA.


View my Flipboard Magazine.


 Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Galaxy S6 Edge latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.

How to Install Android 6.0.1 Marshmallow SAOSP Custom ROM on Galaxy Nexus I9250.




Samsung Galaxy Nexus I9250 SAOSP custom ROM comes with tons of new features and is based on Android 6.0.1 Marshmallow. A quick list of the main features in SAOSP is given below and we are sure you’d love to use this on your Galaxy Nexus I9250:


Cm Battery Icons
Nav bar Height customiztion
Nav bar buttons customiztion
Expanded desktop
Long press lock icon to sleep
Notification & Battery light Customization
Clock & date Customization
Statusbar Weather
Advanced Reboot & Power Menu options
Configurable Auto rotation
Cm clear all recentsButton
Gapps Backup Script
Integrate SuperSU in Settings
IME selector notification Enable/Disable option
Integrated Supersu in Settings
Quick Settings Pull Down
Statusbar Double tap to sleep
Volume wake/music control & cursor control....


View my Flipboard Magazine.


 ÷ Prerequisites:

•This SAOSP Android 6.0.1 ROM tutorial is only for Galaxy Nexus (I9250, maguro) and I am not sure if it will work on the other variants of the Galaxy Nexus on other carriers.

•Make sure your phone is rooted and has a custom recovery like ClockworkMod installed

•Make a Nandroid backup of your previous phone set up before proceeding – for just in case anything goes wrong.





*Disclaimer:

Android Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong  to their owners/developers. The autor of this site or the developers are not responsible,  if you damage or brick your device.Do it on your own risk and follow the instruction properly.

* Important:

Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.



÷ How to Install Android 6.0.1 Marshmallow SAOSP Custom ROM on Galaxy Nexus I9250:


Step 1 – Download SAOSP Android 6.0.1 ROM and Google Apps for Galaxy Nexus on your PC, if you haven’t already.

Step 2 – Connect and mount your Galaxy Nexus USB memory on your computer using the USB cable.

Step 3 – Now copy/paste the downloadedAndroid 6.0.1 ROM zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 4 – Then turn OFF your phone and disconnect from the USB cable.

Step 5 – Now to get in the Bootloader Mode. Turn ON the phone while pressing and holding the Volume Up + Volume Down and Power buttons.

Step 6 – Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.


Step 7 – Once you are in ClockworkModRecovery, select perform a full data wipe by selecting “wipe data/factory reset” . Use the Power button to select everything while in the Recovery Mode.


Step 8 – Then, perform a cache wipe by selecting “wipe cache partition” .

Step 9 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWMrecovery, go to ‘advanced’ and then select “wipe dalvik cache”.


Step 10 – Then go back to the main recoveryscreen and select “install zip from SD card”.

Step 11 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 6.0.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 12 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Galaxy Nexus I9250 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Galaxy Nexus should now have SAOSP Android 6.0.1 Marshmallowcustom ROM installed on your phone! Go to Settings > About phone to verify.




Like this post? PLZ Hit the share buttons below to share this article with your friends on Facebook, Google + and Twitter.

PLZ Follow Us On Flipboard 4 More Galaxy Nexus latest updates.

PLZ Use the comment box below to contribute more ideas & Suggestions .

Best Regards.